'N' Gauge Automatic Coach Light Strips 

 

These strips add lighting to coaches and multiple units - self contained and easy to fit with no wires, switch or pickups.

Each easy fit lighting strip is completely self contained with a built-in  battery and five efficient LED lamps which realistically light the shortest Gresley to the latest Pendolinos! There is no need for any switch because the strip incorporates a small sensor which detects when the train moves and turns on the lights automatically. The lights stay on whilst the train is in motion, then after it stops keeps the lights on for a few minutes before turning them off so that temporary stops at stations or signals leaves the coach lit.

• The Coach Light strips are fitted in seconds and can be held in place by blutack or sticky fixers!

• Runs for many hours on a standard CR1225 button battery (supplied)

• Strip is 100mm long x 8mm wide (14mm wide at the battery holder) - may be cut down

• Built in movement sensor detects motion and turns strip on Automatically - No on/off switch!

• Automatically turns off 4 minutes after last movement

• Lights stay bright and constant with no flickering

• Modern Cool White to simulate fluorescent lights

• No Pickups so works on both regular DC or DCC

• Can be used to light smaller OO / HO coaches

'N' Gauge Coach Light Strips available:

CN1 Cool White Coach Lighting Strip

CN2 Warm White Coach Lighting Strip

CN21 Cool White Coach Lighting Strip with Flashing Tail Light

CN22 Warm White Coach Lighting Strip with Flickering Tail Light

CN26 Warm White Coach Lighting Strip with Flashing Tail Light

CN27 Cool White Coach Lighting Strip with Flickering Tail Light

CN100 Cool White Pack of 3 - 2 x CN1 and 1 x CN21

CN200 Warm White Pack of 3 - 2 x CN2 and 1 x CN22

Battery Info:

• Uses CR1225 battery - readily available from www.dcpexpress.com or Train-tech dealers as BAT2 pack for £4 for a pack of 3.

LED's shown on the coaches have been painted white.

Great little addition that adds realism to the back of your wagons or coaches.  

Use the Dual function versions to add interior lighting, headlights, cab lights etc.

Movement turns on the LED and when stationary will automatically turn off after 4 minutes - no power switch needed!

Fit to brake vans, coaches, wagons etc. Module is 13mm x 11mm (plus battery size)

Runs for ages on a standard button battery.

No pickup, wiring or soldering required as the LED simply plugs straight in!

OO/HO/O/G Gauge modellers: Module easily fits straight into most OO/HO gauge and larger scales.

N Gauge modellers: The AL Module with standard battery will fit in some larger N gauge containers but the instructions now include a guide on how to trim the battery holder down to fit small CR1225 battery inside most N gauge rolling stock. This smaller battery is available as a pack of 3 from DCP Express as product code BAT2 at £4 for 3

There are 2 types in the range, single and dual function.

Single function have one effect in three versions:

AL1 - Flashing tail light - Modern image (Instruction manual )

AL2 - Flickering tail light - Vintage flame lantern effect (which flickers more when the train is going over bumpy track!)  (Instruction manual )

AL3 - Constant light - Use for coach lighting etc.  (Instruction manual )

 

Dual function have an effect + separate output for cab,coach, headlight or headcode lights in four versions:

AL21 - Flashing tail + constant light outputs - Modern image (Instruction manual )

AL22 - Flickering tail + constant light outputs - Vintage flame lantern effect (which flickers more when the train is going over bumpy track!) (Instruction manual )

AL23 - Spark-arc electric effect + constant light outputs - Can be used under the car to produce simulated arc sparks as seen on electrics. (Instruction manual )

AL24 - Dual amber door effect + constant light outputs - When train stops, amber door lights come on.  Will go out after a time and not whilst train is moving. (Instruction manual )

Battery packs for use with all above AL units.

BAT1 - pack of 3 CR2032 standard button batteries

BAT2 - pack of 3 CR1225 mini 12 mm cells for 'N' gauge (Not suitable for AL21, 22, 23 or 24)

OO Gauge Automatic Coach Lighting

 

These Automatic Coach Lighting Strips add lighting to coaches and multiple units. They are self contained and easy to fit with no wires, switch or pickups.

Each easy fit lighting strip is completely self contained with a built-in battery and five efficient LED lamps which realistically light the shortest Gresley to the latest Pendolinos! There is no need for any switch because the strip incorporates a small sensor which detects when the train moves and turns on the lights automatically. The lights stay on whilst the train is in motion, then after it stops keeps the lights on for a few minutes before turning them off so that temporary stops at stations or signals leaves the coach lit.


        

• Easy to fit in seconds - No wiring! Can be held in place by blutack or sticky fixers

• No on/off switch - built in movement sensor detects motion and turns on automatically as the train moves. Turns off 4 minutes after last movement so lights stay on in stations

• No pickups so works on both regular DC or DCC

• Traditional warm white or modern cool white lighting

• Also with tail light, spark-arc effect, door light effects or door tones! (Effect LEDs included)

• Lights stay bright and constant with no flickering

• Fits most OO/HO coaches; lighting strip is 220mm long x 8mm wide (16mm wide at the battery holder) - may be cut down 

• Battery is the popular 20mm diameter 2032 coin cell - lasts months in normal use, years in standby

• Also available in a smaller version for N Gauge (Click Here)

• S Stock underground lighting available (Click Here)

• NEW! Multipacks available - Saves 10%

 

Easy to Fit - Remove coach roof, fix strip in place, replace roof! 

  

Standard Coach Lighting strips - each with fitting guide and battery

CL1 Cool white for modern coaches with flourescent or LED lighting £20 - User manual 

CL2 Warm white for traditional coaches simulating oil lamps or bulbs £20 - User manual 

 

Coach Lighting plus extra effect, each with plug-in LEDs for effect - no soldering!

CL21 Cool white lighting plus modern flashing Lantern LED tail light £25 - User manual 

CL22 Warm white lighting plus flickering flame Lantern LED tail light £25 - User manual 

CL23 Cool white lighting plus bright Electric Spark-arc effect LEDs £25 - User manual 

CL24 Cool lighting plus amber door lights which light after train stops £25 - User manual  

CL25 Cool white lighting plus constant LED tail light £25

CL26 Warm white lighting plus modern flashing Lantern LED tail light £25

CL27 Cool white lighting plus flickering flame Lantern LED tail light £25

CL28 Warm white lighting plus bright Electric Spark-arc effect LEDs £25

CL29 Warm white lighting plus amber door lights which light after train stops £25

CL30 Warm white lighting plus constant LED tail light £25

CL34 Cool white lighting plus door tones and beeps after train stops £25

 

MULTIPACKS

CL100 Cool white pack of 3 - 2 x CL1 and 1 x CL21 £58

CL110 Cool white pack with Spark-arc effects - 2 x CL23 £45

CL120 Cool white pack with amber door lights and tones - 1 x CL24 and 1 x CL34 £45

CL200 Warm white pack of 3 - 2 x CL2 and 1 x CL22 £58

CL210 Warm white pack with Spark-arc effects - 2 x CL28 £45

 

Battery Info:

• Uses CR2032 battery - readily available from dcpexpress.com or Train-tech dealers as BAT1 (Click Here) at just £3 for a pack of 3 and will last most people years!

Instant easy lighting for any coach - DC or digital - AVAILABLE NOW!

Sound & Lighting sets for new S Stock models!

In partnership with London Transport Museum we are proud to launch lighting and sound sets specially designed for the Museum’s brand new S Stock Motorised model tube train.

These special sets have been developed by Train-Tech to bring extra realism to these stunning new models by allowing modellers and collectors to add full interior lighting, under-train spark-arcing effects and authentic door open and closing sounds.

Each light and sound strip is powered from a small readily available coin cell battery and uses Train-Tech’s unique motion sensing technology to automatically switch on and off lighting, spark effects and door tones. As soon as the train starts moving the lighting comes on and as it moves along the track it realistically flashes the spark LEDs underneath the driving cars. Once the train comes to a halt the spark effects cease but the interior lighting remains on and after a few seconds the distinctive door opening and closing tones sound. If the train is stationary for more than four minutes all the lighting and effects shutdown to automatically preserve battery power.

The strips are easily retrofitted into the roof of any of the new S Stock sets with no soldering, wires or special tools required and full instructions are supplied. And because each strip is independently powered on its own battery they work equally well on both regular DC and Digital DCC layouts with no flicker, pick-ups or switches required - all are wire-free and completely automatic. As the lighting and sound effects all work without needing any power to the track they are also likely to be popular with collectors who just intend to display rather than run their models.

Like all Train-Tech products these sets are both designed and manufactured in the UK.

Availability

Train-Tech S Stock Sound & Lighting sets are exclusively available from London Transport Museum retail shop and online store and from our own webshop at www.dcpexpress.com

The CL150 London Underground S Stock 4 car Train Pack Lighting & sound set contains lighting strips for all 4 cars in the main S Stock train pack and includes the spark effects and door tones. Retail price £89 including batteries and instructions.

 The CL51 London Underground S Stock single car Lighting pack includes a compartment lighting only strip which can be fitted into any of the driving or individual cars. Retail price £20 including a battery and instructions.

www.ltmuseumshop.co.uk 

 

The picture below shows a CL150 S Stock lighting & sound set fitted to a train with the driving car showing a Spark-arc flash underneath!  

 

 

The picture below shows a CL51 fully lighting an S Stock centre car