LED's shown on the coaches have been painted white.                 (AL1 Pack Contents)

Automatic Tail Lights

Great little addition that adds realism to the back of your wagons or coaches.  

Use the Dual function versions to add interior lighting, headlights, cab lights etc.

Movement turns on the LED and when stationary will automatically turn off after 4 minutes - no power switch needed!

Fit to brake vans, coaches, wagons etc. Module is 13mm x 11mm (plus battery size)

Runs for ages on a standard button battery.

No pickup, wiring or soldering required as the LED simply plugs straight in!

OO/HO/O/G Gauge modellers: Module easily fits straight into most OO/HO gauge and larger scales.

N Gauge modellers: The AL Module with standard battery will fit in some larger N gauge containers but the instructions now include a guide on how to trim the battery holder down to fit small CR1225 battery inside most N gauge rolling stock. This smaller battery is available as a pack of 3 from DCP Express as product code BAT2 at £4 for 3

There are 2 types in the range, single and dual function.

Single function have one effect in three versions:

AL1 - Flashing tail light  

Modern image flashing effect. (Instruction manual )

AL2 - Flickering tail light  

Vintage flame lantern effect which flickers more when the train is going over bumpy track!  (Instruction manual )

AL3 - Constant light  

Use for constant tail light or interior lighting.  (Instruction manual )

AL4 - New Flashing tail light - Flash rate 2 per second  

New flashing effect - slightly faster than AL1 at 2 flashes per second which is authentic to the 'Dorman' type LED tail lamps in current use on the modern railway. As developed for the 'Oak Road' layout by Mike Buick raising awareness for Meningitis. (Instruction manual )


Dual function have an effect + separate output for cab,coach, headlight or headcode lights in four versions:

AL21 - Flashing tail + constant light outputs  

Modern image (Instruction manual )

AL22 - Flickering tail + constant light outputs  

Vintage flame lantern effect (which flickers more when the train is going over bumpy track! (Instruction manual )

AL23 - Spark-arc electric effect + constant light outputs  

Can be used under the car to produce simulated arc sparks as seen on electrics. (Instruction manual )

AL24 - Dual amber door effect + constant light outputs  

When train stops, amber door lights come on.  Will go out after a time and not whilst train is moving. (Instruction manual )

Battery packs for use with all above AL units.

BAT1 - pack of 3 CR2032 standard button batteries  

BAT2 - pack of 3 CR1225 mini 12 mm cells for 'N' gauge (Not suitable for AL21, 22, 23 or 24)  

Please Note: We are unable to send any batteries or products with batteries outside the UK. Export versions are available, please contact Gaugemaster for more details.